RGB LED Light Strip Connectors 20 Waterproof LED Adapter Connectors Transparent Solderless LED Light Strip Connectors for Strip Light Unwired Gapless Track Lighting Connector 5V 12V 24V (4 Pin, 10 mm)

• Main Function: this 4 pin connector can be applied for 10 mm/ 0.4 inches RGB LED strips and 22 AWG 4 pin wires, solid wires and multi core wires; Tip: not applicable to 8 mm/ 0.31 inch or 12 mm/ 0.47 inches LED strips; Please use a standard 22 AWG wire for connection; There are some unqualified wires on the market that may result in unsuccessful connection; When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire
• Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector
• Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection; Unqualified wires may include: there are too few copper cores to connect accurately; The copper core is off center and cannot conduct current; If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect
• The Reason for Choosing Our Connector: made of quality PC material, our LED connector is sturdy, safe, and not easy to break, lightweight and simple to carry
• Rich Quantity: you will get 20 pieces LED connectors for strip lights, large amounts to meet the connection requirements in daily life, also you can send these must have tools to people in need as practical gifts

Features:

Easy to use:
You can assemble the wire according to your needs, and our LED light strip connectors can flexibly adapt to different projects. No soldering required. Just snap the prepared LED strip section into the connector to connect. Compatible with 30-120 LED/Meter strips and can support high current LED strips.

More tips:
LED adapter connector fits for the connector to work with 24V system and suitable for RGB strip lights with soldering pads, both IP20 non-waterproof and IP65 waterproof light strips. You can pierce the light bar from the back or the front. The IP20 RGB light bar is recommended to be pierced from the front of the light strip, and the IP65 waterproof light bar is recommended to be pierced from the back without removing the silicone on the surface of the light bar. If you accidentally cover the connector, you can pry it off with a screwdriver.

Please use a standard 22 AWG wire for connection. There are some unqualified wires on the market that may result in unsuccessful connection. When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire. Unqualified wires may include: there are too few copper cores to connect accurately. The copper core is off center and cannot conduct current. If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect.

Specifications:
Material: PC
Color: transparent
Quantity: 20 pieces
Size: as picture shown

Package includes:
20 x LED light connectors

Warm notes:
Please allow a little error on the size due to manual measurement.
Please read the size instruction carefully before purchasing.
Not applicable to 8 mm/ 0.31 inch or 12 mm/ 0.47 inches LED strips.
Small parts are included, please keep away from children under 3 years old.